Your inquiry list is empty!
Remote controlled surface cleaner Gekko 350 removes coatings of large steel surfaces without scaffolding
The Magnet Crawler Gekko 350, such as a Ship Hull Crawler cleans ship and tank surfaces in remote-controlled operation. Magnets and chain drive guarantee hold and movement.
We have specially developed the KAMAT Gekko 350 in order to clean large steel surfaces, for example ships, or large tanks, rapidly and without building scaffolding. Key technical advantages of the high-pressure surface cleaner are the thought-out combination of natural magnets and chain drive, as well as controllable high-pressure nozzles. The complete high-pressure system is remotely controlled conveniently and safely.
The hold and drive combination of natural magnets and pneumatically-driven chains enables the Ship Hull Crawler to move over vertical steel surfaces quickly and controllably. It is even able to travel over openings and edges of the steel surfaces, and to clean there. Close radii can also be run over.
Horizontal overhead cleaning and vertical cleaning are possible with our magnet crawler Gekko 350
The controllable, pneumatically-driven, 300 mm nozzle rotor ensures that coatings of every type are removed leaving metallically clean steel. Even overhead work is possible. Thus the usual, manual jetting work for the cleaning e.g. of ship and tank surfaces, is reduced significantly. The Gekko 350 has the option to be driven by a mobile KamJet or a KAMAT plunger pump of the type K25000.
max. flow 40 l/min
max. operating pressure 3,500 bar
working width (diameter)
300 – 350 mm
width of housing (diameter) 460 mm
width of housing 940 mm
medium water
max. temperature of medium 50 °C
high-pressure fitting M 14×1.5 LH
weight approx. 65 kg
number of nozzles max. 12
suitable nozzle inserts Form 0964
air consumption req.
(filtered air) 25 l/s
filtration 5 μm
min. air pressure required 6 bar
stepless speed adjustment
0-4,5 m/min
control voltage standard 24 V DC
Part No. 7018909
